top of page

Built for
Australian Conditions

From intense summer heat and coastal weather to heavy rain, strong winds and large seasonal temperature changes, Australian buildings face very different conditions depending on where they are located.

A window or door is not simply there to close an opening. It forms part of the building envelope, helping manage wind pressure, rain, uncontrolled air movement and structural loads.

Australia spans tropical, subtropical and temperate climates, with significant differences in temperature, humidity and rainfall across the country. Severe weather can also bring damaging winds and intense rainfall.

​

That is why our window and door systems are performance tested to AS 2047, using the test methods of AS/NZS 4420.1.

Strong Winds & Storms

Wind pressure can cause frames, mullions and sashes to bend or distort. Deflection Test confirms the frame remains within allowable deformation under service wind pressure.

Extreme Wind Loads

Severe wind events can place substantially higher structural loads on the complete window or door assembly. Ultimate Strength Test verifies the assembly can withstand high positive and negative pressures without structural failure.

Heavy & Wind-Driven Rain

Rain driven against the façade can enter through seals, joints, tracks and drainage paths. Water Penetration Test applies water while the unit is subjected to differential pressure to verify resistance to leakage.

Air Infiltration

Uncontrolled air leakage can introduce draughts and place additional load on heating and cooling systems. Air Infiltration Test measures how much air passes through the closed window or door under pressure.

Test Reports

Independently tested

Our qualification file brings together independent laboratory testing and supporting certification for Glazed Frog window and door systems, providing traceable evidence of product performance against relevant Australian and international standards.

​

Glazed Frog's aluminium door systems GF100CD24 and GF100CD25 have been independently tested against AS 2047:2014 by Beijing Building Materials Testing Academy Co., Ltd., a CNAS-accredited laboratory recognised through the ILAC Mutual Recognition Arrangement.

GF100CD24

Casement Door | AS 2047:2014

​

Test Report No.

JN2024WX0273

​

Testing Laboratory

Beijing Building Materials Testing Academy Co., Ltd.

​

Date of Issue

24 January 2025

​

Applicable Standards

AS 2047:2014

AS/NZS 4420.1:2016

​

Test Results

PASS

GF100CD25

Casement Door | AS 2047:2014

 

Test Report No.

JN2024WX0274

​

Testing Laboratory

Beijing Building Materials Testing Academy Co., Ltd.

​

Date of Issue

24 January 2025

​

Applicable Standards

AS 2047:2014

AS/NZS 4420.1:2016

​

Test Results

PASS

AS 2208:2023

Safety Glazing Materials in Buildings

​

Certificate Holder

Thien Phu Glass

​

Certification Body

Global-Mark Pty Ltd

​

Certification Type

Product Certification – System 5

​

​

Certified Products

Specified Toughened & Laminated Glass

AS 4666:2012

Insulating Glass Units

​

Certificate Holder

Thien Phu Glass

​

Certification Body

Global-Mark Pty Ltd

​

Certification Type

Product Certification – System 5

​

​

Certified Products

IGU-01, IGU-02, IGU-03, IGU-04

Tested System Performance

The following table provides a summary of Glazed Frog window and door systems tested against AS 2047 requirements, including structural performance, water resistance and air infiltration.

System

83 series - Double hung

100 series - AFW Awning fix window

100 series - Fix Window

100 series - Hinged Door

100 series - Sliding Window

115 series - Bifold Door

130 series - Sliding Door

210 series - Staking Door

Published values apply to the specific tested configurations. Final project suitability should be confirmed against the required product size, configuration and project documentation.

Ultimate Strength Test

±3000 Pa - Pass

±3000 Pa - Pass

±3000 Pa - Pass

±3000 Pa - Pass

±4000 Pa - Pass

±3000 Pa - Pass

Maximum Size

±4000 Pa - Pass

Tested Size

±3000 Pa - Pass

Deflection Test

Water Penetration Test

Air Infiltration

300 Pa - Pass

Water Penetration Test

500 Pa - Pass

Ultimate Strength Test

600 Pa - Pass

System

300 Pa - Pass

Maximum Size

300 Pa - Pass

Tested Size

300 Pa - Pass

Deflection Test

300 Pa - Pass

Air Infiltration

300 Pa - Pass

Water Penetration Test

Air Infiltration

Ultimate Strength Test

±75 Pa - Pass

System

±75 Pa - Pass

Maximum Size

±75 Pa - Pass

Tested Size

±75 Pa - Pass

Deflection Test

±75 Pa - Pass

Air Infiltration

±75 Pa - Pass

Water Penetration Test

±75 Pa - Pass

Ultimate Strength Test

±75 Pa - Pass

System

Deflection Test

Maximum Size

Tested Size

±1200 Pa - Pass

Deflection Test

Air Infiltration

Water Penetration Test

Ultimate Strength Test

System

Maximum Size

Tested Size

±1600 Pa - Pass

Deflection Test

±1200 Pa - Pass

Air Infiltration

±1600 Pa - Pass

Water Penetration Test

±1200 Pa - Pass

Ultimate Strength Test

±1200 Pa - Pass

System

±1200 Pa - Pass

Maximum Size

±1200 Pa - Pass

Tested Size

Tested Size

Deflection Test

1860x960 mm

Air Infiltration

1800x2000 mm

Water Penetration Test

4000x2700 mm

Ultimate Strength Test

2400x900 mm

System

1500x1800 mm

Maximum Size

2700x2700 mm

Tested Size

2700x2400 mm

Deflection Test

2700x6000 mm

Air Infiltration

Maximum Size

Water Penetration Test

1860x960 mm

Ultimate Strength Test

1800x2000 mm

System

4000x2700 mm

Maximum Size

2400x900 mm

Tested Size

1500x1800 mm

Deflection Test

2700x2700 mm

Air Infiltration

2700x2400 mm

Water Penetration Test

Ultimate Strength Test

System

Maximum Size

Tested Size

Deflection Test

Air Infiltration

Water Penetration Test

2700x6000 mm

Ultimate Strength Test

System

door and window-certificates.mp4

Need the full test documentation?

The table above provides a summary of our tested systems and their key performance results. Full laboratory test reports, test configurations and supporting documentation are available for architects, builders, consultants and certifiers upon request.

bottom of page